How to Program Standard Awnings Using a Sunea RTS Motor

It’s important to power only one motor at a time while programming.

Start programming by pressing both up and down at the same time until the awning jogs.

A jog is a brief in and out move of your motorized product.

Check the direction of operation by pressing down to confirm it moves the awning out. Now let’s set the limits. Move the awning to the desired inner limit by pressing and holding up. Release when the inner limit is reached.

Press and hold “my” and down until the awning begins to move out, then release. Use “my” to stop it at the desired outer limit. You can make adjustments if necessary.

Press and hold “my” and up until the awning begins to move in, then release. Immediately press "my" to stop the awning. Press and hold "my" until the awning jogs. Press and hold the program button on the back of the remote until the awning jogs.

Your limits are now set! Now is an ideal time to install or add any additional accessories such as wind sensors, wall switches and timers.

Enjoy your Somfy motorized awning!